Floor Heating

Energy Saving

Radiation systems achieve energy savings of 12% to 20% on an annual basis, because these systems work at low temperatures and create a relaxing atmosphere at room temperature of 20 degrees or less (compared to 22 degrees or more, required in conventional heating systems with radiators).

In addition, the operating cost of the system can be reduced to the absolute minimum by combining a heat pump in order to use the energy stored in the atmosphere and to work independently from expensive sources of energy such as oil.

 High Sanitation Level

Underfloor heating and cooling systems are pure radiation systems, so they achieve a low operating temperature, similar to room temperatures.

This automatically creates better hygienic conditions as the slightly heated surface - due to the small temperature differences - does not create air flows and dust recirculation, as the conventional radiator heating.

Floor Cooling

A flooring system, which during the winter period creates ideal thermal comfort conditions, can also be used for cooling during the summer season. The underfloor cooling system is a silent solution that does not generate air drafts and combined with a heat pump, can reduce the total system's operating cost to minimum.

Better Use of Spaces - No more exposed heat radiators

With a floor heating and cooling system, all the exposed heat radiators and air conditions are removed. This results in complete freedom in the formation of spaces, since the place is freed from everything that prevents its formation.

AND molded plates

Floor Heating and Cooling System using molded plates - for new constructions and renovations.

The molded plates are used in a wide range of applications using a 17X2.0 mm PEB cross-linked polyethylene flexible tube.

The installation is easy, with the possibility of diagonal laying and without the use of additional support materials. It offers the possibility of low height applications and creates a water vapor barrier in the paving area.

AND Tacker

Floor heating and cooling system with special pipe hooks on thermal insulation boards - for new constructions and renovations.

This system facilitates the paving of the pipe with asymmetric geometric spaces and allows all types of floor heating and floor heating system.

Distribution and Automation systems

Underfloor heating and cooling systems are completed with the distribution and automation program including collectors, thermostats, electrothermal heads. All of these individual components are part of the most modern integrated heating and cooling system floor: AND floor heating.

Collectors

AND Floor heating system collectors are non-corrosive, stainless steel INOX, cross section 1 and 3/4 Eurocone outputs with regulating switches, with flow meters and thermostatic return switches for actuating actuators 24Vac or 230V , with evacuation valves, ventilators, thermometers on both bars and a set of supports. They start from 2 facilities and reach 12.

Collectors' Panels

The collectors can optionally be installed in special white galvanized panels with a detached door and lengths from 400mm to 1000mm for the 509B series and 600mm to 1200mm for the 513 series.

Room Autonomy / Automation

For individual room autonomy, actuators 24Vac or 230V are mounted on the collectors, which are connected to the system thermostats with an accuracy of ± 0.5 ° C.

Wiring Center is located in the central collector of the installation and controls the Thermoelectric actuator (T30NC) that open and close the underfloor circuits.

KL08RF Wiring Center operates wirelessly with the SALUS Smart Home series thermostats.

There is also the extension of the wiring center KL04RF for control of additional 4 zones - Code: 048.002.0210

Thermoelectric actuators SALUS T30NC are placed in the central manifold and control (open and close) the underfloor circuits wired.

Alternatively, we can choose the corresponding ENGO E30NC230 Thermoelectric Actuator or the SALUS THB23030 Auto Balancing actuator which automatically does the necessary hydronic balancing of the Underfloor Heating circuits.

We choose as many thermostat units as the autonomy zones we want to have. Ideally we install a thermostat per room.

Each thermostat is then adjusted to control the TRV Heads of the respective room.

It is recommended to choose a Smart Thermostat from the following list:

• HTRS-RF(30) – Wireless Digital Thermostat SALUS Smart Home - Code: 048.002.0285 (VFM choice)
• SQ610RF Quantum – Wifi Thermostat SALUS Smart Home - Code: 048.002.0325 (TOP choice)
• SQ610 Quantum – Wifi Thermostat SALUS Smart Home - Code: 048.002.0330 (Surface-mounted -230V)
• TS600 – Wireless Thermostat - Code: 048.002.0315 (for control only through application)
• For more thermostat options see the ANDRIANOS catalogue.