For the safe and efficient operation of the Solar Thermal System, apart from the solar panels, the solar boiler, the solar stations and the solar controller, many other accessories are equally important, such as:
- Certified Piping, for solar circulation systems
- Special Pressure Regulating Valves, certified up to 130oC / 8 bar
- Certified Valves for resistance to very high temperatures up to 180oC
- Safety valves that can withstand -30oC to 160oC, with a maximum pressure of 10 bar
- Three-way mixing / thermostatic valves for regulating hot water
- Automation for connecting the solar panels with the gas boiler and the cooperation between them
ANDRIANOS has been working on Solar Systems since 1994. Using its long experience in Solar Thermal Systems, it introduces, represents and distributes in the Greek market, products of the top companies, NMC Germany, TACONOVA Switzerland, IVR and WATTS Italy.
The brand ANDRIANOS in both Messinia and the rest of Greece is synonymous with quality and energy saving in Solar Thermal Systems.
Flexible INOX Pipes and Insulation for Solar Systems
For the correct circulation of the thermal medium and the maximum reduction of the losses of the solar thermal system, the correct piping network is necessary. ANDRIANOS provides piping from AEROLINE Germany, for operation in Solar Thermal Systems.
Double spiral stainless pipe SOLAR PRO made in EU, suitable for high temperature solar systems up to 150°C
- Made of stainless steel AISI 316L.
- With separable polyamide braiding, highly resistant to UV radiation and certified for resistance to birds, rodents, etc.
- Red & blue stripes to distinguish the supply/return lines.
- Insulation material is EPDM, rubber based insulation which minimizes heat loss and is suitable for application from -40°C to 150°C
Available in sizes DN16, DN20 & DN25.
Spiral pipe stainless monorail NMC CLASSIC Germany, suitable for solar systems up to 150°C
- Made of stainless steel AISI 316L.
- Corrosion resistant and flexible tubes made of high quality stainless steel.
- Thermal conductivity coefficient λ (0°C) : 0.036 W/m.K.; λ (40°C) : 0.038 W/m.K.
- EPDM closed-cell elastomeric rubber insulation minimizes heat losses
- Temperature range: up to 150°C and for short periods up to 175°C, according to EN14707
For solar systems with large piping dimensions DN32 & DN40
For all piping systems, the respective mounting and connection kits are available.
Special Regulating Valves Taconova Switzerland for Solar Systems
Balancing and shut off valve Tacosseter Bypass Solar 130
This high temperature bypass valve Tacosetter Bypass Solar 130 is ideal for hydraulic balancing of collector arrays of different sizes
Characteristics:
- Bypass operation up to 130 oC/ 8bar, with lock kit (included in delivery) up to 185 oC/ 10 bar.
- Fast setting by direct flow rate indication in l / min.
- Any positioning & no maintenance required.
- Also available with special insulation box according to ENEV standard for thermal insulation from -30oC to 130oC
Βalancing valve Tacosetter Bypass Flange
Tacosetter Bypass Flange balancing valve, gray iron, gray coating,flange DIN/PN16 ΤΒ100°C, PB 10bar
Βalancing valve Tacosetter Inline 130
The Tacosetter Inline 130 line regulator, with TB 130oC and PB 8bar, for smaller supplies from the Bypass line
Βalancing valve Tacosetter Tronic
The Tacosetter Tronic balancing valve with Flow and Temperature Measurement, TB 120oC, PB 8bar.
Characteristics:
- Exact and fast measurement of flow volume and temperature.
- Exceptional measurement accuracy
- Measuring range: 0oC - 100oC. / Water / glucose viscosity ≤ 4mm² / s / Glucose resistant / Any placement, minimum pressure loss / No moving parts, no maintenance required.
Valves and accessories for solar thermal systems (Certified for resistance to very high temperatures)
Ball valve total flow IVR Italy Solar Line
Ball valve total flow IVR Italy Solar Line FxF with a handle suitable for hydraulic solar installations.
Characteristics:
- With operating temperatures from -30oC to + 180oC, maximum pressure 16 bar.
- Suitable for hydraulic circuits with a mixture of glycol up to 50%
Safety valve IVR Italy
Safety valve with 1/2 X 3/4 internal / internal threads IVR Italy and presets at 3,4 and 6 bar.
Characteristics:
- With operating temperatures from -30oC to + 180oC, maximum pressure 16 bar.
- Suitable for hydraulic circuits with a mixture of glycol up to 50%
Automatic vent valve IVR Italy for solar systems
Automatic air vent IVR solar line, threaded ends M
Characteristics:
- With operating temperatures from -30oC to + 200oC, maximum pressure 10 bar.
- Suitable for hydraulic circuits with a mixture of glycol up to 50%
Exvoid solar - Air bubble separator REFLEX Germany
Air bubble separator, "Exvoid solar", REFLEX Germany, brass, 10 bar, 180oC
The high antifreeze content and the possibility of high temperatures make the evaporation of solar systems particularly difficult.
Exvoid solar degassers are preferably installed at the high points of the plant. The microbubbles are removed quickly and reliably.
Characteristics:
- Swivels out the free air microbubbles
- Automatic continuous operation
- Causes minimal pressure drop without fluctuations
- Suitable for antifreeze up to 50%
- Significantly accelerates hydraulic balancing after filling the plant
- Prevents noise generation, corrosion damage due to corrosion and reduced performance due to high air concentration
- Full range of products for various pressures, temperatures and materials.
Novamix - Thermostatic Mixing Valve TACONOVA Switzerland
Thermostatic Mixing Valve TACONOVA Switzerland Novamix high-pressure supply with burn-in protection in the event of failure of cold water supply.
Characteristics:
- Operating temperature 20 -70oC, flow 102lt / min at Δp = 1bar (Kvs1 = 6,1), Tmax 90oC
- Pmax 10bar. Kvs1: no non-return valve, Kvs2: with non-return valve
- Constant water temperature at the outlet.
- Automatic operation without the need for mixing for auxiliary power.
- Large setpoint range of 20 - 70oC.
- High setting accuracy and flow rates. Very low rate of cold water leakage.
- Valve housing with non-stick coating for protection against salt contamination.
- Installation instructions for reliefs in the housing: Flow direction, hot (+), cold (-) and water mixer
- It can also be used as a diverting valve.
- Extensive range of accessories and spare parts.
3 way Modulating control valve MXG461B Siemens
3 way Modulating control valve MXG461B series Siemens with magnetic actuators, positioning control and position feedback for domestic water , PN16, IP31
The MXG641B valves are through – port or mixing valves with magnetic actuators. The actuator is equipped with an electronic module for positioning control and position feedback. The short positioning time, high resolution and high rangeability make these valves ideal for modulating control of domestic, hot and cold water systems.
Characteristics:
- Selectable valve characteristics: Equal percentage or linear
- Selectable standard interface : 0/2 to 10 Vdc, or ./4 to 20 mA
- Fast positioning time <2 s.
- High resolution (>1:1000)
- High rangeability
- Wear-free inductive stroke measurement
- Spring return A – AB closed when de-energized
- Positioning control and position feedback signal
- Low – friction, heavy – duty and maintenance – free
- Accepts 0 to 20 Vdc phase-cut control signal input
Immersion temperature controller RLE162 Siemens
Immersion temperature controller RLE162 Siemens AC 24 V, DC 0...10 V output, ΙΡ65.
Compact electronic controller with immersion type temperature sensor and setting unit combined in one device. It is designed for installation directly onto the plant. Only the wires for power supply connection and controller output need to be laid. Supplied with threaded nipple for direct temperature sensing.
Characteristics:
- Domestic hot water temperature
- Heating flow temperature
- Closed circuit heat exchangers
- Water – side control of HVAC units
- Chilled water temperature
Thermostatic kit Watts Italy for solar system and wall-mounted gas boilers
Automation for connection of the solar collector with the gas boiler and the cooperation between them.
Provides uninterrupted hot water to the user for installations that use solar in conjunction with other heat source such as boiler.
Absolutely autonomous, running without power.
Application:
- If the water in the solar tank is already too hot (above the desired setpoint of 45oC), it will automatically mix with cold water through the heat sink so that the water at the outlet has a safe constant temperature.
- When the temperature in the tank is too low (below 45oC), switching to a heat source (gas boiler) which will heat the water and then mix to reach the set-up temperature for the various hot water needs at the building.
Features & Benefits:
- Fully autonomous: energy saving.
- No wires and sensor cables: save time.
- Easy installation for new or old facilities.
- Distribution of hot water to the existing grid at an ideal temperature setting.
- Integrated protection using a thermomechanical valve, and an automatic switching valve. Combination of valves in KIT for easy installation.
Technical data:
- Messon: Drinking water
- Switching valve opening temperature: 45 ° C (factory setting).
- Temperature control valve temperature range: 30oC - 65oC
- Maximum static pressure: 10 bar
- Hot and cold water flow pressure: 0.2 to 5 bar
- Hot water supply temperature: 52 * to 110oC, cold water: 5 to 20oC
- * The temperature difference between hot water and mixing water must be at least 10oC