Solar Station Tacosol Circ ER for 50 sq.m. solar panels - Τaconova Switzerland

Solar Station Tacosol Circ ER for 50 sq.m. solar panels - Τaconova Switzerland

The TacoSol Circ solar stations are supplied ready-to-be-connected and can be fitted by a single installer. Hydraulic balancing and flow measurement can be carried out directly on the solar station in all versions. The dual-phase versions increase their effectiveness through the automatic air separation in the integrated ventilating flask.k. 

Description:

Pump assembly with high-efficiency pumps, balancing valve and optional safety subassembly for solar heating energy systems.

Advantages:

• Functional check and hydraulic balancing without measurement devices, diagrams or tables, thanks to TacoSetter Inline 130 with glycol scale
• Multifunctional ball valve makes it much easier to fill and drain the system
• Integrated backflow preventer prevents incorrect circulation
• Pump can be changed with ease (lockable on the intake and output sides)
• Safe and low-maintenance

Functions:

• In combination with a solar controller, the solar liquid heated in the collector is transported to the hot water/drinking water storage tank via a heat exchanger with the help of the solar station
• The integrated balancing valve enables the volume flow to be adjusted to the performance of the collector or heat exchanger and checked
• The flow measurement of this balancing valve is based on the principle of a float with return spring
• The flow meter is integrated in the pump group
• The regulating screw on the flow meter is used to adjust the flow
• The index mark is the lower edge of the float element

Equipment:

• TacoSetter Inline 130 integrated balancing valve with direct display of the set flow rate in l/min; display already calibrated for medium viscosity of 2.3 mm2/s
• Shutoff valve with integrated metal backflow preventer
• Available with optional safety subassembly
• Circulating pumps: see overview of types
• Solar thermometer with 0 - 160 °C display range; installed in the safety pipe
• Mounting material

Technical Data:

• Operating temperature TO max: 110 °C
• Operating pressure PO max: 8 bar
• Actuating pressure of the safety valve: 6 bar
• Thread according to DIN 2999/ISO 7 and ISO 228
• Measuring precision of TacoSetter Inline 130: ± 10% (of the final value)
• kvs value and measuring range: see data sheet